Item added to your cart
White FFP2 mask certified by notified body 0370. Filtration efficiency > 94%, inhalation resistance < 350, expiration resistance < 250. Prevention of respiratory tract infection.
The White FFP2 Mask is a high performance respiratory protection device, certified by Notified Body 0370, with a filtration efficiency of more than 94% and an inhalation resistance of less than 350 and expiration resistance of less than 250. It complies with EN 149:2001+A1:2009 and is certified as PPE module B and C. It is stored at temperatures between -20°C and +30°C, with a relative humidity of less than 80%, and has a shelf life of 3 years from manufacture. This mask is suitable for the prevention of respiratory infection and is recommended for use in environments where exposure to airborne particles represents a health risk.
Non-woven fabric. Does not contain PP or glass fibre
The instructions for use of the White FFP2 Mask are as follows:
1. Preparation: Wash hands thoroughly before handling the mask.
2. Fitting: Hold the mask in one hand, with the nose clip facing towards the fingers and the straps hanging down.
3. Fitting: Place the mask over the face, completely covering the nose and mouth. Fit the nose clip to the nose and ensure that the edges of the mask are in direct contact with the face.
4. Verification: To verify that the mask fits properly, perform a positive and negative pressure check.
5. Negative pressure check: Place both hands on the mask and inhale sharply. The mask should sink slightly towards the face. If you notice air leaks, readjust the nose clip and head straps.
6. Positive pressure check: Place both hands on the mask and exhale sharply. No air should escape from the mask if it is correctly fitted to the face.
7. Removal: To remove the mask, wash your hands, and avoid touching the front of the mask. Remove the mask by pulling on the elastic straps, without touching the centre surface of the mask.
These detailed instructions are essential to ensure proper fit and effective protection when using the white FFP2 mask.
The advantages of the White FFP2 Mask include:
- High filtration efficiency: With a filtration efficiency of over 94%, the White FFP2 Mask can help filter a wide range of airborne particles, making it suitable for environments where exposure to airborne particles poses a health risk.
- Respiratory protection: Certified as a respiratory protection device, this filtering facepiece is designed to protect the wearer against airborne particles, making it suitable for the prevention of respiratory contagion.
- Fit and comfort: The white FFP2 mask is designed for a secure and comfortable fit, making it suitable for extended wear.
These advantages make the white FFP2 respirator an effective choice for respiratory protection in a variety of environments.
The features of the FFP2 White respirator are as follows:
- Colour: White
- Layers: 5
- Size: Adult
- Includes earsaver
- Material: Non-woven fabric. Does not contain PP or fibreglass
- Washable: No
- Storage: Temperature: -20 to +30°C, relative humidity: <80%, shelf life: 3 years after manufacture
- Filtration efficiency: > 94%.
- Inspiration resistance: < 350
- Expiration resistance: < 250
- Standards: EN 149:2001+A1:2009
These features make it an effective respiratory protection device for the filtration of airborne particles and the prevention of respiratory tract infection.
It is essential to ensure that the FFP2 mask is properly fitted to the face to ensure its effectiveness. Before use, check for damage and perform a positive and negative pressure check to ensure that the mask fits properly. Also, remember that the FFP2 respirator is designed for single use only and should be discarded when clogged or damaged. Always wash your hands before and after handling the mask to ensure adequate protection.
